UST Mamiya Recoil DART 65 TaperCurrent
Maker specifications
| Flex | Weight | Torque | Tip | Butt | Length | Launch |
|---|---|---|---|---|---|---|
| F2 A 3 Iron A | 65g | 3.1° | 0.355" | 0.6" | 40.5" | Mid-High |
| F2 A 4 Iron A | 65g | 3.1° | 0.355" | 0.6" | 40" | Mid-High |
| F2 A 5 Iron A | 65g | 3.1° | 0.355" | 0.6" | 39.5" | Mid-High |
| F2 A 6 Iron A | 65g | 3.1° | 0.355" | 0.6" | 39" | Mid-High |
| F2 A 7 Iron A | 65g | 3.1° | 0.355" | 0.6" | 38.5" | Mid-High |
| F2 A 8 Iron A | 65g | 3.1° | 0.355" | 0.6" | 38" | Mid-High |
| F2 A 9 Iron A | 65g | 3.1° | 0.355" | 0.6" | 37.5" | Mid-High |
| F2 A Wedge A | 65g | 3.1° | 0.355" | 0.6" | 37" | Mid-High |
| F3 R 3 Iron R | 66g | 3.1° | 0.355" | 0.6" | 40.5" | Mid-High |
| F3 R 4 Iron R | 66g | 3.1° | 0.355" | 0.6" | 40" | Mid-High |
| F3 R 5 Iron R | 66g | 3.1° | 0.355" | 0.6" | 39.5" | Mid-High |
| F3 R 6 Iron R | 66g | 3.1° | 0.355" | 0.6" | 39" | Mid-High |
| F3 R 7 Iron R | 66g | 3.1° | 0.355" | 0.6" | 38.5" | Mid-High |
| F3 R 8 Iron R | 66g | 3.1° | 0.355" | 0.6" | 38" | Mid-High |
| F3 R 9 Iron R | 66g | 3.1° | 0.355" | 0.6" | 37.5" | Mid-High |
| F3 R Wedge R | 66g | 3.1° | 0.355" | 0.6" | 37" | Mid-High |
- Build
- Graphite iron shaft, Recoil family
- Profile
- Mid-High launch
- Sources
- Published specifications and model history via ustmamiya.com (low confidence on the launch year)
Weight by flex
Related sheets
Thinking about this shaft?
Bring your club by and we’ll measure what you play now against this sheet, then build a test club so you can hit the two side by side before anything gets pulled. Numbers here are raw, uncut, as the maker publishes them.