TaylorMade Milled Grind 2 (MG2)
Factory specifications
| Loft | Bounce | Grind | Lie | Length | SW | LH |
|---|---|---|---|---|---|---|
| 48° | 9° | SB | 64° | 35.75" | D3 | No |
| 50° | 9° | SB | 64° | 35.5" | D3 | Yes |
| 52° | 9° | SB | 64° | 35.5" | D3 | Yes |
| 54° | 8° | LB | 64° | 35.25" | D5 | No |
| 54° | 11° | SB | 64° | 35.25" | D5 | Yes |
| 56° | 8° | LB | 64° | 35.25" | D5 | Yes |
| 56° | 12° | SB | 64° | 35.25" | D5 | Yes |
| 56° | 12° | TW | 63° | 35.5" | D6 | No |
| 58° | 8° | LB | 64° | 35" | D5 | No |
| 58° | 11° | SB | 64° | 35" | D5 | No |
| 60° | 8° | LB | 64° | 35" | D5 | Yes |
| 60° | 10° | SB | 64° | 35" | D5 | Yes |
| 60° | 11° | TW | 63.5° | 35.25" | D4 | No |
- Grinds
- SB Standard Bounce: broader full sole, the all-rounder; 9-12 deg bounce depending on loft.
- LB Low Bounce: narrow crescent/C-shaped sole with 8 deg bounce for open-face shots and firm turf.
- TW Tiger Woods grind (added Sept 2020, RH only): 56 is a dual-sole with heavy heel relief; 60 adds leading-edge relief for firm turf. Built to Tiger's specs (63/63.5 lie, S400).
- Finishes
- Satin Chrome, Matte Black
- Stock shaft & grip
- True Temper Dynamic Gold S200 (TW grind: Dynamic Gold Tour Issue S400) · Lamkin Crossline 360 (TW grind: Golf Pride Tour Velvet Full Cord)
- Notes
- Pre-2020 release (retail Sept 6, 2019, $169.99) included because the TW grind variant shipped Sept 4, 2020 ($200). Core SB/LB matrix agrees across golfio, GolfBox AU and 2ndSwing; lengths come from golfio only (GolfBox AU and 2ndSwing omit lengths but match lie/SW). LH lofts per GolfBox AU: 50, 52, 54, 56, 60; 2ndSwing confirms 48 SB, 58 SB, 54 LB, 58 LB are RH only. golfio omitted the SW for 50 SB; D3 taken from 2ndSwing's 'D3 (48-52)'. TW bounces: golf.com and 2ndSwing say 56/12 and 60/11; GolfBox AU says 56/11 and 60/12 (likely transposed). TW lie/length/SW from 2ndSwing only. Some retailers list the grip as Lamkin Crossline Soft Cord or Genesis Crossline Cord.
Bounce by loft
Related sheets
Have this set?
Bring it by and we’ll check it against this sheet on the loft-and-lie machine, or get a trade-in offer on the spot. Numbers here are the maker’s standard right-hand, men’s steel-shaft build.