Maltby TS-2
Factory specifications
| Club | Loft | Lie | Length | Offset | Bounce |
|---|---|---|---|---|---|
| 4 | 21° | 61° | 38.5" | 0.14" | 3° |
| 5 | 24° | 61.5° | 38" | 0.135" | 3° |
| 6 | 27° | 62° | 37.5" | 0.13" | 3° |
| 7 | 30° | 62.5° | 37" | 0.125" | 4° |
| 8 | 34° | 63° | 36.5" | 0.12" | 4° |
| 9 | 39° | 63.5° | 36" | 0.11" | 4° |
| PW | 44° | 64° | 35.5" | 0.1" | 5° |
| GW | 49° | 64° | 35.5" | 0.1" | 5° |
- Build
- three-piece billet forged hollow body, polymer filled, tungsten toe weight, forged 1025C carbon steel body and 2 mm face, internal tungsten weight
- Source
- Maker’s standard RH men’s steel build, via loftchart.com
Loft progression
Related sheets
Have this set?
Bring it by and we’ll check it against this sheet on the loft-and-lie machine, or get a trade-in offer on the spot. Numbers here are the maker’s standard right-hand, men’s steel-shaft build.