Maltby TS-1 IMCurrent
Factory specifications
| Club | Loft | Lie | Length | Offset | Bounce |
|---|---|---|---|---|---|
| 3 | 20° | 60° | 39" | 0.11" | 3° |
| 4 | 22° | 60.5° | 38.5" | 0.11" | 3° |
| 5 | 25.5° | 61° | 38" | 0.1" | 3° |
| 6 | 29° | 61.5° | 37.5" | 0.1" | 4° |
| 7 | 32.5° | 62° | 37" | 0.09" | 4° |
| 8 | 36° | 62.5° | 36.5" | 0.09" | 4° |
| 9 | 40° | 63° | 36" | 0.08" | 5° |
| PW | 44° | 63.5° | 35.5" | 0.08" | 5° |
| GW | 48° | 64° | 35.5" | 0.08" | 5° |
- Build
- three-piece billet forged hollow body with injected polymer face backing ("Injected Muscle"), forged 1025C carbon steel body, 2.1 mm MS300 super maraging steel face, internal tungsten toe weight
- Source
- Maker’s standard RH men’s steel build, via loftchart.com
Loft progression
Related sheets
Have this set?
Bring it by and we’ll check it against this sheet on the loft-and-lie machine, or get a trade-in offer on the spot. Numbers here are the maker’s standard right-hand, men’s steel-shaft build.