Cobra KING MAXCurrent
Factory specifications
| Club | Loft | Lie | Length | Offset | SW |
|---|---|---|---|---|---|
| 4 | 21° | 62.5° | 39.25" | 0.299" | D2.5 |
| 5 | 23.5° | 63° | 38.5" | 0.264" | D2.5 |
| 6 | 26.5° | 63.5° | 37.75" | 0.232" | D2.5 |
| 7 | 29.5° | 64° | 37.25" | 0.205" | D2.5 |
| 8 | 34° | 64.5° | 36.75" | 0.177" | D2.5 |
| 9 | 39° | 65° | 36.25" | 0.15" | D2.5 |
| PW | 44.5° | 65° | 36" | 0.126" | D2.5 |
| GW | 50° | 65° | 35.75" | 0.102" | D2.5 |
| SW | 56° | 65° | 35.5" | 0.083" | D2.5 |
- Build
- cast distance iron with a 360 SPEEDSHELL face and a 3D-printed internal medallion, stainless steel with a 360 SPEEDSHELL H.O.T. Face insert and a 3D-printed lattice medallion
- Stock shafts
- KBS Tour Lite (steel · 105g · flexes: R, S), KBS PGI 85 / 75 / 65 (graphite · 65-85g · flexes: A, R, S)
- Source
- Maker’s standard RH men’s steel build, via loftchart.com
Loft progression
Related sheets
Have this set?
Bring it by and we’ll check it against this sheet on the loft-and-lie machine, or get a trade-in offer on the spot. Numbers here are the maker’s standard right-hand, men’s steel-shaft build.