Cobra DS-ADAPT
Factory specifications
| Club | Loft | Lie | Length | Offset | SW |
|---|---|---|---|---|---|
| 4 | 19° | 62° | 39.25" | 0.213" | D1 |
| 5 | 21° | 62.5° | 38.5" | 0.181" | D1 |
| 6 | 24° | 63° | 37.75" | 0.154" | D1 |
| 7 | 27° | 63.5° | 37.25" | 0.126" | D1 |
| 8 | 31.5° | 64° | 36.75" | 0.102" | D1 |
| 9 | 36.5° | 64.5° | 36.25" | 0.079" | D1 |
| PW | 42° | 65° | 36" | 0.059" | D1 |
| GW | 48° | 65° | 35.75" | 0.039" | D1 |
| SW | 54° | 65° | 35.5" | 0.039" | D1 |
- Build
- hollow-body distance iron with a wrap-around forged face insert and foam-filled cavity, stainless steel body with a 360 SPEEDSHELL forged face insert, an internal PWR-BRIDGE weight and a soft foam filling
- Stock shafts
- KBS Tour Lite (steel · 105g · flexes: R, S), KBS PGI 65 / 75 / 85 (graphite · 65-85g · flexes: A, R, S)
- Replaced
- Cobra Darkspeed
- Source
- Maker’s standard RH men’s steel build, via loftchart.com
Loft progression
Related sheets
Have this set?
Bring it by and we’ll check it against this sheet on the loft-and-lie machine, or get a trade-in offer on the spot. Numbers here are the maker’s standard right-hand, men’s steel-shaft build.