Mitsubishi Tensei 1K Pro WhiteCurrent
Maker specifications
| Flex | Butt / mid / tip | Weight | Torque | Tip | Butt | Length | Par. tip | Kick | Launch | Spin |
|---|---|---|---|---|---|---|---|---|---|---|
| 50 R |
| 54g | 4.6° | 0.335" | 0.598" | 46" | 3" | High | Low | Low |
| 50 S |
| 56g | 4.5° | 0.335" | 0.601" | 46" | 3" | High | Low | Low |
| 50 X |
| 59g | 4.4° | 0.335" | 0.601" | 46" | 3" | High | Low | Low |
| 50 TX |
| 61g | 4.4° | 0.335" | 0.601" | 46" | 3" | High | Low | Low |
| 60 R |
| 60g | 3.8° | 0.335" | 0.596" | 46" | 3" | High | Low | Low |
| 60 S |
| 62g | 3.8° | 0.335" | 0.602" | 46" | 3" | High | Low | Low |
| 60 X |
| 65g | 3.8° | 0.335" | 0.603" | 46" | 3" | High | Low | Low |
| 60 TX |
| 67g | 3.8° | 0.335" | 0.603" | 46" | 3" | High | Low | Low |
| 70 S |
| 71g | 3.4° | 0.335" | 0.604" | 46" | 3" | High | Low | Low |
| 70 X |
| 75g | 3.3° | 0.335" | 0.607" | 46" | 3" | High | Low | Low |
| 70 TX |
| 76g | 3.2° | 0.335" | 0.607" | 46" | 3" | High | Low | Low |
| 80 S |
| 82g | 2.8° | 0.335" | 0.626" | 46" | 3" | High | Low | Low |
| 80 X |
| 84g | 2.8° | 0.335" | 0.626" | 46" | 3" | High | Low | Low |
| 80 TX |
| 86g | 2.7° | 0.335" | 0.626" | 46" | 3" | High | Low | Low |
- Build
- Graphite driver / fairway shaft, Tensei family
- Profile
- Low launch, Low spin · High kick point
- Section profile
- Published butt/handle, mid and tip descriptions, relative within the maker’s range. Sources: mitsubishigolf.com
- Sources
- Published specifications and model history via mitsubishigolf.com, fairwayjockey.com
Weight by flex
Related sheets
Thinking about this shaft?
Bring your club by and we’ll measure what you play now against this sheet, then build a test club so you can hit the two side by side before anything gets pulled. Numbers here are raw, uncut, as the maker publishes them.