Graphite Design Tour AD HDCurrent
Maker specifications
| Flex | Butt / mid / tip | Weight | Torque | Tip | Butt | Length | Par. tip | Kick | Launch | Spin |
|---|---|---|---|---|---|---|---|---|---|---|
| 4 R2 |
| 49g | 5.8° | 0.335" | 0.598" | 46" | 3" | Mid | Mid | Low-Mid |
| 4 R1 |
| 49g | 5.8° | 0.335" | 0.598" | 46" | 3" | Mid | Mid | Low-Mid |
| 4 S |
| 50g | 5.7° | 0.335" | 0.598" | 46" | 3" | Mid | Mid | Low |
| 5 R2 |
| 56g | 4.5° | 0.335" | 0.596" | 46" | 3" | Mid | Mid | Low-Mid |
| 5 R1 |
| 57g | 4.4° | 0.335" | 0.598" | 46" | 3" | Mid | Mid | Low-Mid |
| 5 S |
| 59g | 4.4° | 0.335" | 0.6" | 46" | 3" | Mid | Mid | Low |
| 5 X |
| 61g | 4.4° | 0.335" | 0.604" | 46" | 3" | Mid | Mid | Low |
| 6 SR |
| 65g | 3.1° | 0.335" | 0.596" | 46" | 3" | Mid | Mid | Low-Mid |
| 6 S |
| 66g | 3.1° | 0.335" | 0.598" | 46" | 3" | Mid | Mid | Low |
| 6 X |
| 68g | 3.1° | 0.335" | 0.6" | 46" | 3" | Mid | Mid | Low |
| 6 TX |
| 69g | 3.1° | 0.335" | 0.602" | 46" | 3" | Mid | Mid | Low |
| 7 S |
| 74g | 2.9° | 0.335" | 0.6" | 46" | 3" | Mid | Mid | Low |
| 7 X |
| 76g | 2.9° | 0.335" | 0.602" | 46" | 3" | Mid | Mid | Low |
| 7 TX |
| 77g | 2.9° | 0.335" | 0.604" | 46" | 3" | Mid | Mid | Low |
| 8 S |
| 86g | 2.6° | 0.335" | 0.6" | 46" | 3" | Mid | Mid | Low |
| 8 X |
| 88g | 2.6° | 0.335" | 0.602" | 46" | 3" | Mid | Mid | Low |
- Build
- Graphite driver / fairway shaft, Tour AD family
- Profile
- Mid launch · Mid kick point
- Section profile
- Published butt/handle, mid and tip descriptions, relative within the maker’s range. Sources: proschoicegolfshafts.com
- Sources
- Published specifications and model history via proschoicegolfshafts.com, proschoicegolfshafts.com
Weight by flex
Related sheets
Thinking about this shaft?
Bring your club by and we’ll measure what you play now against this sheet, then build a test club so you can hit the two side by side before anything gets pulled. Numbers here are raw, uncut, as the maker publishes them.